Philips beauty Hydraprotect salon sensor 1800 HP4899/01 Mode D'emploi page 5

exceeding 30mA in the electrical circuit
supplying the bathroom.Ask your installer for
advice.
Keep the appliance away from children.
Never block the air grilles.
If the appliance overheats, it will switch off
automatically. Unplug the appliance and let it
cool down for a few minutes. Before you
switch the appliance on again, check the grilles
to make sure they are not blocked by fluff,
hair, etc.
Always unplug the appliance after use.
Drying
1 Put the plug into the wall socket.
C
2 Switch the appliance on by setting the on-
off slide to position 1.
C
3 Select the desired air speed by pushing +
to increase and - to decrease the speed of
the airflow.
C
The temperature sensor constantly monitors
the moisture content of the hair during the
drying process.
Never press the red cover of the temperature
sensor to avoid malfunctioning of the appliance.
ENGLISH
5