Features; Battery Installation; Hot-Shoe Connector; Operating Instructions - Elinchrom EL-Skyport 19351 Mode D'emploi

EL-Skyport
Transmitter
19351

Operating instructions :

2.4 GHz digital wireless
Flash Trigger Transmitter

Features

EL-Skyport flash trigger is designed with the latest 2.4 GHz Digital Wireless Technology.
• Up to 1/1000s shutter speed
• 5 selectable trigger modes
• 8 frequency channels
• 40 Bit security encryption
• Up to 50 m range indoors
• Up to 120 m range outdoors
• Battery life up to 3 Months
• RX-feature buttons (Remote Control)
• Test trigger button
• Integrated Hot-shoe (middle contact)
• SYNC-socket for direct connection
You will appreciate the convenience of this professional, and powerful wireless device.
Note:
Shutter speed and distance range is influenced by reflections (from ceilings, walls, floor, furniture and
other equipment) and interference from other 2.4 GHz electronic equipment. For best performance the
Transmitter and Receiver antenna should have direct sight, without any walls or objects in between.
2

Battery Installation

1. Pull the battery drawer out carefully
2. Place the Lithium battery, see Fig. 1 for polarity
3. Close the battery drawer
! CAUTION:
• Ensure correct polarity / minus pole on top
• Use original Elinchrom Lithium Battery only (CR2430 3.0V 19372)
• Remove battery if the EL-Skyport Transmitter is not to be used for some time
• Never short-circuit battery poles

Hot-shoe connector

The standard Hot-shoe connector with middle contact synchronisation is designed for all
digital and analogue cameras with maximum sync output of 3V
(The middle contact is the positive pole).
Operating Instructions
Fig . 1
Battery (19373)
Minus pole on top
Battery drawer
(19373)
Flexible swivel
Antenna 360 ̊
Hot-shoe with
SYNC socket
3