ISkin CERULEAN RX Guide D'utilisation page 2

What's Inside the Box
CERULEAN RX USB and Auxiliary Cables
(Stereo Bluetooth Receiver)
Use this to connect the CERULEAN
Docks with a speaker made for iPod. RX with audio systems that support
Adds wireless Bluetooth (A2DP) auxiliary inputs.
capability to any speaker system.
About the CERULEAN RX
The CERULEAN RX is designed to wirelessly connect your speaker system with a Bluetooth® (A2DP)
capable computer, audio device or CERULEAN TX equipped iPod (not included). It's perfect for
listening to music or watching movies on your Bluetooth device and getting big sound through
your speaker system – wirelessly.
The CERULEAN RX reproduces pristine stereo sound and works with most of today's popular
docking speakers made for iPod and home speaker systems. It is compatible with other Bluetooth®
devices such as mobile phones, stereo headphones and PDA's.
Supported Profiles.
A2DP
Enables the CERULEAN RX to receive stereo audio wirelessly via Bluetooth.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by iSkin Inc.
is under license. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
Page 1 Getting Started
Connect the CERULEAN RX to a docking speaker
made for iPod.
1. Dock the RX as you would an iPod making sure
that the status LED light is facing forward.
2. Turn speaker power on. The status light will flash
User Manual
rapidly as it awaits a connection from another
stereo Bluetooth device (discoverable).
Warranty
User's Guide
Warranty Info
(Note: CERULEAN RX does not contain a battery. It requires a powered docking speaker such as the Apple Hi-Fi or an external USB
power supply as described later in this manual).
Connecting a Stereo Bluetooth Device to the CERULEAN RX Equipped Speaker
Make sure the CERULEAN RX is properly docked as described above.
1. Enable Bluetooth on your mobile device (refer to your device's user manual).
2. Using your device's Bluetooth options, search for and pair with the iSkin CERULEAN RX.
3. When pairing with the iSkin CERULEAN RX, your mobile device will prompt you to enter
a four digit security code. Enter 0000 (four zeros) and continue.
4. Your mobile device may display a message stating that the device is "Bonded" or "Connected" .
Once successfully paired, the status LED light on the RX will begin to flash slowly symbolizing
that a connection is made. The RX equipped speaker is now ready to wirelessly receive audio
from your Bluetooth device.
Note: If pairing fails or no sound is available, repeat the above steps or refer to the troubleshooting
section of this guide. It is necessary to undock or unplug the CERULEAN RX from a power source
and then reconnect it before pairing with a new (unpaired) Bluetooth device.
Range and Performance: The CERULEAN RX utilizes Bluetooth radio frequency technology
for sending and receiving audio; thus, range and environmental conditions affect performance.
Elevating an RX equipped speaker in a room allows for better performance. The standard Bluetooth
range is 33 feet (10 meters); however, RX may achieve a longer operational range without interruptions in
rooms free of radio (i.e. cordless phones, wireless routers) and electro-magnetic interference.
Page 2 Reconnecting the CERULEAN RX to the Previously Paired Device
If the current Bluetooth device connected to the CERULEAN RX becomes unavailable or is
disconnected, the CERULEAN RX will remain in auto-reconnect mode until the device becomes
available and automatically re-establishes the connection. You may also re-select the iSkin
CERULEAN RX from your Bluetooth device's "Paired Devices" menu.
Note: The CERULEAN RX's status light will flash very quickly, pause for a short moment and repeat
while in auto-reconnect mode.
Status LED light flashes rapidly and awaits
Connecting the CERULEAN RX to a Home Audio System
a connection from a stereo Bluetooth device.
Although designed to work with a docking speaker made for iPod, the RX can also be connected
to any home speaker system with an auxiliary input using the following accessories:
Requirements:
1. Male stereo RCA to female 3.5mm adapter + male to male 3.5mm stereo cable (included)
2. CERULEAN RX (included)
3. Mini USB Cable (included)
4. USB (5V DC) AC Power Adapter (not included)
Following the diagram below, use the included auxiliary cables to connect the CERULEAN RX
to your home stereo. Use a USB (5V-DC) AC wall charger to power the CERULEAN RX (available
at most electronic stores or visit iSkin.com for more information)
Home Audio System
4
AUX
L R
L R
2
CERULEAN RX
1 3
RCA to 3.5mm Stereo Cable Mini USB Cable (Type A)
Page 3
USB (5V DC)
AC Power
Adapter