Troubleshooting
RX is connected to my speaker but no sound is available.
• Verify that the RX is properly connected to the docking speaker made for iPod and its status
LED light is flashing slowly indicating that it is paired with another Bluetooth device.
• Verify that your connected Bluetooth device supports stereo streaming (A2DP).
• Verify that your connected Bluetooth device is set to route audio via Bluetooth.
• Verify that your connected Bluetooth device is playing audio.
• Verify that your speaker volume is turned up.
• Verify that there are no other Bluetooth devices set to pairing mode within the vicinity.
• Unplug and reinsert RX and wait for their status LED light to flash quickly ensuring it is ready
to be discovered by another Bluetooth device.
Other questions? Learn more about Bluetooth and the CERULEAN RX at: www.iSkin.com
Warranty Service
Note: The Serial Number is located in fine print on the rear of the CERULEAN RX.
If the CERULEAN RX does not function correctly, consult the Troubleshooting
section of this guide and/or visit iSkin.com for further online resources. If the unit continues
to malfunction, visit iSkin.com and check the warranty section.
Page 4
Understanding the Status Light (LED)
STATUS
DEFINITION
Light flashes quickly
Initial Pairing, looking for new device to pair with.
repeatedly.
Occurs when the CERULEAN RX is first docked or
(Discoverable)
connected to a power source.
Seeking previously paired device to reconnect to.
Light flashes very quickly,
pauses and repeats.
Occurs when the CERULEAN RX has previously connected
(Auto-reconnect)
to a Bluetooth device and has lost connection.
Light flashes
Successfully paired.
slowly repeatedly.
Occurs when the CERULEAN RX has been successfully
(Paired / Connected)
paired with a Bluetooth device.
Normal Operational
Range: 33ft (10m)
iSkin and CERULEAN are trademarks of iSkin Inc.,
registered in Canada, the U.S. and other countries.
www.iSkin.com
Page 5
ON
OFF
User's Guide
Printed in China
+
TX
RX
F1
RX
RX