Publicité
Les langues disponibles
Les langues disponibles
Connection
1.
Connect the curly cord to the handset and to the
socket marked y on the telephone.
2.
Connect the telephone power cord to a network
wall socket and to the K socket on the back of
the telephone.
3.
Lift the handset and listen for the dial tone.
Batteries
Four AA alkaline batteries are needed for the call
memory and speakerphone. When
displayed, replace all 4 batteries. Use only AA
alkaline batteries of good quality.
Note!
Before installing or changing the batteries,
make sure that the telephone is not connected
to the telephone network.
1.
Remove the battery cover and insert the batteries
ensuring correct battery polarity is observed.
2.
Replace the battery cover and reconnect the
telephone power cord.
English
Installation
8
BATT. LOW
is
Publicité
