Tracing Underground Wires; Tracing Low Voltage Wires And Data Cables - Beha-Amprobe AT-7000-EUR Mode D'emploi

4. SPECIAL APPLICATIONS

4.7 Tracing Underground Wires

The AT-7000 can trace wires underground, the same way it can locate wires behind walls or floors.
Perform tracing as described in Energized SMART SENSOR mode or Energized / De-Energized
TIP SENSOR modes.
You can use a hot sick attachment to make tracing more ergonomic and convenient.

4.8 Tracing Low Voltage Wires and Data Cables

The AT-7000 can trace data, audio, and thermostat cables (to trace shielded data cables,
refer to section 4.6 "Tracing Shielded Wires").
Trace data, audio, and thermostat cables as follows:
1. Connect the AT-7000-TE transmitter using the separate ground method described in
section 3.3 "Tracing De-Energized Wires".
2. Set the AT-7000-RE receiver to De-energized TIP SENSOR mode and trace the wire (see
section 3.3 for further detailed set-up instructions).
25