Publicité
Les langues disponibles
Les langues disponibles
Assembly instruction
. Assembly of the net
a) At rst x net holders at the net rope. Bend open net holders a little and press rope into the holders. We recommend the fol-
lowing distribution of net holders:
crossbar :
pieces
upright :
pieces each
e) Dismantling of the net is also done by rotation of the net holders through
screw driver.
for art.-nr.
/
b) After having mounted all net holders x net at the goal
construction. Stick net holders in the net hook rail and
x them with a
In case, use for this a thin screw driver.
c) Fix net at the bottom of net hoops with cable clips. Cut
projecting parts.
d) Cut the attached cord in half so that there are short
cords. Fix the end of one cord in one upper ring nut and
knot it well. Pull the cord through the net meshes and x
it in the nd upper ring nut and knot it well.
Repeat the steps with the nd cord in bottom ring nuts.
School Sports · Club Sports · Fitness · Therapy
degrees' rotation.
degrees. In case use again a thin
Publicité
