Publicité
Les langues disponibles
Les langues disponibles
Assembly instruction
. Assembly of the goal
We recommend to mount the goal on the grass or on a suitable surface to avoid damages of the pro les.
Mount upper hinge with fastening boreholes. Please consider that the inclined side of the hinge points to the goal inside.
Push nuts
mm, M below the boreholes of the hinge and tighten it with safety hexagonal screws DIN
for art.-nr.
a) Lay bar/upright construction on the ground with guide rail
b) Stick from the bottom (upright's end) nuts
c) To x the lower hinge stick from the bottom (upright's end)
d) Beat cap
e) Fix net hoops in the hinges.
Take care that the end of the net hoop with boreholes (round tube) is xed in the
upper hinge and the end with borehole (square tube) is xed in the lower hinge.
Boreholes of hoops have to be congruent with boreholes of the hinges.
f) Fixing of the hoop at the upper hinge:
/
School Sports · Club Sports · Fitness · Therapy
showing upwards.
each in the guide rail of the upright and push them to the
top.
nut
mm, M each in the guide rail of the upright. Mount
lower hinge with fastening borehole.
Please consider that the inclined side of the hinge points to
the goal inside.
Push nut
mm, M below the borehole of the hinge and x
it at the upright with safety hexagonal screw DIN
M x
.
x
into the upright (use a mallet if necessary),
adjust lower hinge and tighten xing screw. Take care that
the hinge at the bottom is flush with the upright's cap.
Stick from the top hexagonal screw DIN
through the rst borehole of hinge and hoop. Then add
washer DIN
, Ø . mm at the hinge lower side, screw and
tighten self-locking nut DIN
Fixing of the hoop at the lower hinge:
Stick from below slotted countersunk head screw DIN
M x
through hinge and hoop. Then add washer DIN
Ø . mm at the hinge upper side, screw and tighten self-
locking nut DIN
, M .
mm, M
, M x
.
,
, M x
, M .
,
,
Publicité
