Thursday 9 Jan. 2014 00:15:60; Operating Instructions; Introduction; Control Panel - Ferroli FORCE W Instructions D'utilisation, D'installation Et D'entretien

FORCE W

1. Operating instructions

1.1 Introduction

Dear Customer,
Thank you for choosing FORCE W, a wall-mounted sealed chamberFERROLI boiler featuring advanced design, cut-
ting-edge technology, high reliability and quality construction. Please read this manual carefully, as it provides important
information on safe installation, use and maintenance.
FORCE W is a high-efficiency, low emissions, premix condensing heat generator, running on Natural Gas (G20), Li-
quefied Gas (G30-G31) and Propane Air (G230), equipped with a microprocessor control system.
The boiler body consists of an aluminum tube exchanger and a premix burner in steel, equipped with electronic igni-
tion and ionization flame control, a modulating speed fan and a modulating gas valve.

1.2 Control panel

Legend
1 = Contextual button 1
2 = Contextual button 2
3 = Contextual button 3
4 = Dot matrix display (example - main screen)
5 = Menu navigation button
6 = Confirm/menu access button
7 = Menu navigation button
Contextual button
The contextual buttons (details 1, 2, 3 - fig. 1) are grey, with no screen print, and take on a different meaning depending
on the menu selected. It is essential to observe the indication provided by the display (icons and text). In fig. 1 for exam-
ple, using the contextual button 2 (detail 2 - fig. 1) it is possible access unit information such as: temperature of sensors,
work power, etc.
EN
4 1 2
23°C
60°C 40°C
88°C

Thursday 9 Jan. 2014 00:15:60

14
fig. 1- Control panel
cod. 3541V233 - Rev 00 - 06/2022
5 6 8 9 11 12
3 7 10 13
8 = Automatic/Manual Heating/DHW button
9 = Summer/Winter mode selection button
10 = Economy/Comfort mode selection button
11 = Menu exit button
12 = Main menu button
13 = Home button (back to Home page)
14 = Main switch
217