Symbols In The Manual; Compliant Use Of The Machine; Warnings And Hazards Deriving From Machine Use; Hazards Deriving From Machine Use - Berkel BV 400/25 Mode D'emploi

2.2 SyMBOlS IN The MaNUal
This manual contains symbols to highlight hazardous situations for the safety of the appliance and/or the ope-
rator, particularly important Standards, recommendations, warnings and precautions to be complied with when
using or servicing the machine. These symbols must be understood by the personnel using and servicing the
appliance before commencing any operation.
ElECTrICal HaZard
Risk of electric shock.
daNgEr
Indicates a potential hazard to life and health. Failure to comply with these warnings can cause
damage to persons, the appliance or the environment.
RISK OF BURNS
Indicates the risk of burns if contact is made with very hot surfaces.
NoTE
Indicates recommendations for use and other useful information.

2.3 CoMPlIaNT uSE of THE MaCHINE

The vacuum packing machine has been studied and designed to vacuum bags and rigid containers, with a
complete standard cycle (vacuum and seal) being performed every 60 seconds.
It is prohibited to use the appliance in a manner or for a purpose other than those indicated by the manufacturer
in this manual. Proper use of the appliance also includes compliance and awareness of the instructions and
warnings contained in this instruction manual, as well as the timely implementation of all inspections, servicing
and cleaning of the appliance.
The manufacturer declines all declines all liability for damage caused to persons, animals or objects deriving
from non-compliant use of the appliance.

2.4 warNINgS aNd HaZardS dErIvINg froM MaCHINE uSE

2.4.1 HaZardS dErIvINg froM MaCHINE uSE

daNgEr!
• The machines are designed and manufactured according to the latest technology available
and are compliant with applicable safety Standards. Nevertheless, they may be a source of
danger if the safety requirements contained in this manual are not complied with or in the
event of improper use.
Strictly comply with the following safety guidelines:
• Before use, make sure the machine is intact and bears no signs of damage.
• If the machine is not used for a long period of time, it must be switched off from the main switch.
• Prevent unauthorised persons from accessing the work area.
• Use suitable work clothes and protection gloves.
• Never use the machine in potentially explosive environments, or in the presence of flammable vapours and
gas.
• Make sure there is sufficient ventilation in the workplace.
• Immediately remove all obstacles and interference that can compromise safety.
Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 – BV 400/25H – BV 600/60 Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 - BV 600/60
Rev. 01 - 04/2019 - Cod. 1500656 - Instruction manual for vacuum chamber packaging machines Mod. C46-C46H-C62
9