AA-lift 78005 Manuel D'instructions page 14

4.0 INSTALLATION
The hoist standard version is provided with a specially designed bracket system
which allows to hold pipes box.
Check that socket features (volt-hertz) correspond to those indicated on the
machine plate; then, you can insert the plug.
In case a cable extension is needed, it is absolutely important to repect the table's
data:
Cable lenght
Up to 20 m
from 20 to 50 m
5.0 MAINTENANCE
- Periodically check that the steel cable is in good condition.
- Check that the screws securing the brackets and reduction gear are well
tightened.
- Check the condition and tightening of the nuts securing the steel cable clamps.
- Periodically check that motor stop switch and push button switch are in good
operating condition.
1-2 replace
Cable diameter
1,6 mm
2,5 mm
12