Webtec Can / External Can - WEBTEC HPM7000 Manuel D'utilisation

Design and Function
3.3.1

Webtec CAN / External CAN

You can use the CAN X and CAN Y ports to connect the device
via CAN BUS lines and additional Y-junctions to up to 24 Webtec
sensors (max. 24 channels ) with automatic sensor detection
(Webtec CAN).
Fig. 4 Connection port, CAN X / CAN Y
PIN Designation
1 Shielding
2 +Ub (+24 V
3 GND
4 CAN High
5 CAN Low
INFORMATION
The CAN X and CAN Y ports are not galvanically separated. A galvan-
ic separation is only provided in the optional CAN Input Module.
22
4 3
1 2
)
DC
5