Restarting The Device - WEBTEC HPM7000 Manuel D'utilisation

7.1

Restarting the Device

If the device no longer responds, it must be restarted.
IMPORTANT
Loss of data.
Data which has not been saved could be lost if the device is restart-
ed.
► Only initiate a restart of the device when it is absolutely
necessary.
1 Press the On/Off switch and blue function key simultaneously for
approx. 3 seconds.
Ä The device is switched off.
2 Press the On/Off key.
Ä The device starts up again.
Fig. 60 Restarting the device
Troubleshooting
117