Kicker iKICK iK350 Manuel D'utilisation page 4

USING THE SYSTEM MENU ROTARY CONTROL
The iK350 Stereo System's rotary control provides an intuitive user interface. The System Menu options listed on the
LED display below are available for adjustment by the rotary control. The rotary control knob is used as a push-button to
power on the iK350 and to scroll through the menus available on the LED display. Turning the rotary control knob allows
you to adjust the parameters of the selected menu.
Figure 4
Tap the rotary control knob
to scroll through menu
selections. Tap and hold to
turn the unit off.
After plugging the power supply into the DC input on the back of the iK350, the unit will be in "Standby" mode, as
displayed by the LED display on the System Menu. Turn the power on by pushing the rotary control button once. When
the power is on, the "DOCK" LED will be illuminated on the System Menu.
Volume: By default, the iK350 will be in volume control mode. Turn the rotary knob to adjust the volume up or down.
The rotary control will automatically revert to volume control mode after a short time period if any other menus have been
selected.
To scroll through the other menus, simply use the rotary control as a push-button. Each single button push will take you
from one menu to the next, rotating through TREB>BASS>DOCK/AUX and back to the volume control.
Treble: To adjust the treble on the iK350, use the rotary control as a push-button to scroll through the menus until the
"TREB" menu is displayed on the LED display. Turn the rotary control knob clockwise to increase treble and counter-
clockwise to reduce treble.
Bass: To adjust the bass level on the iK350, use the rotary control as a push-button to scroll through the menus
until the "BASS" menu is displayed on the LED display. Turn the rotary control knob clockwise to increase bass and
counterclockwise to reduce bass.
Input Source (DOCK/AUX): To enable the auxiliary input on the iK350, an external device must be plugged into the
1/8" stereo auxiliary input on the back of the unit. Use the rotary control as a push-button to scroll through the menus
until your current input source (DOCK/AUX) is fl ashing. Turn the rotary control clockwise and counter-clockwise to switch
between AUX and DOCK input. You may also enable auxiliary input by using the Mode button on your remote control to
cycle through menus, then pressing the up/down arrows to select your input source.
Standby: In "Standby" mode, the iK350 will be powered down, but your docked iPod will continue to charge as long as
a power source is plugged into the DC input on the back of the iK350. To enter standby mode simply press and hold the
rotary control button until the unit turns off and "STBY" is illuminated.
4
STBY DOCK AUX
iK350STEREOSYSTEM
TREB BASS
iK350 System Menu
Turn the rotary control to adjust
the System Menu parameters.