TXED BIKE E-TIME CITY 8000MM Mode D'emploi Et Entretien page 47

5.2 CURRENT DISPLAY
That represents the discharging current of the controller currently, each segment
is 2A, six segments is >=12A.
5.3 SPEED DISPLAY
It displays the current riding speed of e-bike. The speed display is as below.
5.4 KM/H & MPH
Hold "+" and "-" buttons for 2 seconds to enter into the mode of setting. Press MODE to choose setting
parameters (KM/H or MPH) and press "+" and "-" buttons to exit setup.
To reset the total mileage, press the "+" and "-" buttons for 5 seconds to display the screen below (Fig 5.1) (Fig
5.2).
Hold the "-" button to reset (Fig. 5.3).
Press again the "+" and "-" buttons for 5 seconds to return to the main screen (Fig 5.1).
(Fig. 5.1) (Fig. 5.2) (Fig. 5.3)
5.5 BACKLIGHT INDICATOR
With the power on, hold UP for 1.5 seconds and turn on the backlight. Click it again for 1.5 seconds and turn off
the backlight.
5.6 6 KM/H WORK
Hold for 3 seconds and enter into the mode of power assist walk. The e-bike is
traveling at 6Km/h. Display as shown.
5.7 ASSIST LEVEL SELECTION
Click UP or DOWN to change the stages and output power ratio, the output power
range from level 0 to level 6 for the default (the levels can be customized by user),
the default value is level 1.