Nature Power 22050 Manuel D'instructions page 4

How to use Control Dials (See Fig 7)
The 60 LED Solar Security Light has 3 different control dials which allow you to adjust
the settings.

Sensitivity to Light (Lux)

The lights duration once motion has been detected (Time)

Sensitivity to motion (Sens)
Lux

This is the level of darkness reached before the light turns on

If set to maximum level the light will turn on in most situations ranging from
dusk to daylight.

If set to minimum the sensor will only trigger when it's dark. This is the most ideal position for general
evening and night operation.
Time

The Time adjusting dial will set the duration of time the light will stay illuminated for after motion has
been detected.

The time can be adjusted from 8 seconds up to 2 minutes.

Rotating the dial clockwise will extend the time the lamp is illuminated.
Sens

This determines the range of the motion detector

Mid Position – Normal Setting

Maximum position – Maximises sensors range (12 Meters [40ft]). (Fig 8 and 9)
Maintenance

Ensuring the lamp is kept clean will optimise performance

Clean Solar cell with a damp towel, Do not apply excessive pressure.

Do not use any solvents or cleaning agents on the solar modules.
Page 4 of 10