in-lite SHUTTER 2 Manuel D'utilisation page 7

EN
Contents
1x SHUTTER 2
Material
Nylon
Please read the following instructions before installing. You are
advised to keep these installation instructions in a safe place.
Use
Cap set for installation on ACE (UP)DOWN 100-230V wall fixtures.
SHUTTER 2 allows you to adjust the light angle of the ACE UP-DOWN
100-230V wall fixtures to any width. (Fig. 1)
Installation advice
Easy to install by placing the ring over the lens of the light source.
Position the tab on the ring towards the wall and press the ring secure.
(Fig. 2) Always switch off the power first!
Important!
ACE UP-DOWN (DARK) 100-230V contains two light sources, so in or-
der to be able to adjust both beams of light, you need two SHUTTERS.
Important!
This product should only be used within the in-lite system. Use of prod-
ucts other than those made by in-lite will invalidate the warranty.
Enjoy the lighting in your yard.