Long-Term Storage; Troubleshooting And Repair - Eskimo Grizzly 26500 Manuel De L'utilisateur

ANCHORING
5
TIE-OUT FEATURE:
This specific shelter model includes a tie-out feature
(Figure 19). This feature is to be used in high winds to
prevent the shelter from sliding around on the ice.
To properly use this feature the shelter must be fully
deployed with the rear spreader pole #27730 installed.
Be sure to always position the rear of the shelter facing into
the wind.
•
The tie-out feature can be used with Eskimo's Deluxe
Shelter Tie-Down Kit #24260, sold separately.
•
Ice Anchors not included.
IN-SKIRT ANCHOR GROMMETS:
This shelter model also includes in-skirt grommets to aid
in conditions where little snow is present on the ice.
An ice anchor can be installed in each corner of the shelter
to keep the skirt flat to the ice. Sealing out the elements.
Check for parts online at www.GetEskimo.com or call 800-345-6007 M-F 8-5 CDT
TIE OUT
FEATURE
|
26500 Grizzly™ Flip-Style Sled Shelter
LONG TERM STORAGE TIPS
Always make sure your ice shelter is completely dry before
storing for long periods of time. Storing your ice shelter
when damp or wet may cause mold and mildew damage.
• Remove skin from ice shelter sled and frame.
• Clean all salt, moisture and debris from your shelter
skin, sled and poles. Wipe down poles with a wet rag.
• Store skin, poles an sled in a cool, dry place away
from rodents.
SERVICE, TROUBLESHOOTING, AND REPAIR
Service Information
At Ardisam, we build quality and durability into the
design of our products; but no amount of careful design
by us, and careful maintenance by you, can guarantee
a repair-free life for your unit.
We will always be glad to answer any questions you have,
or help you find suitable assistance.
ORDERING REPAIR PARTS
Parts may be obtained from the store where your auger
was purchased or by calling Ardisam customer service
at the number listed below. To order from the factory,
call, e-mail, or order online at www.GetEskimo.com:
Eskimo®
A Division of Ardisam, Inc.
1-800-345-6007
E-mail: info@geteskimo.com
Please include the part numbers, part description,
quantity, model number and serial number.
Operator's Manual
11