Tivoli Audio ONE+ Manuel Utilisateur page 8

Remote Control
MUTE: Mutes the radio.
1.
ALARM: Press to set the radio alarm.
2.
NAVIGATION ARROWS/SELECT: Use the arrows to navigate the on-
3.
screen options and confirm options with the SELECT button.
VOLUME UP: Press to raise the volume.
4.
VOLUME DOWN: Press to lower the volume.
5.
PRESET BUTTONS: Press to recall a saved radio station, hold to save a
6.
new radio station.
SETTINGS: Press to enter the full settings menu.
7.
SOURCE: Press to change the radio source.
8.
SLEEP: Press to set the sleep timer.
9.
POWER: Press to turn the radio on and off.
10.
Prior to pairing, verify your device supports Bluetooth and your device is not connected to any other
Bluetooth product. Devices may pair differently. Below is a general guide.
1. Turn on the Model One+ and turn the source knob until "Bluetooth" appears on the display of
the radio.
2. Press the "Scan" button on the front of the radio. The display should now read "Pairing Enabled".
3. Turn on the Bluetooth on your enabled device.
4. Select "Tivoli Model One+|XXXXX" when it appears on your device's screen to initiate pairing.
5. You will see "Bluetooth Connected" on the display of the Model One+ confirming connection
and you can begin playing your music files wirelessly. Adjust the volume level on your device.
You should not have to pair your device again.
Your Model One+ can be used as a standalone speaker. Simply use an 1/8" stereo cable to attach any
line or headphone level source into the AUX input on the back of your radio. You can control the
volume of the speaker using the volume control on the Model One+ or with the volume control of your
audio source.
English
Bluetooth Mode
Auxiliary Mode
7