Publicité
Les langues disponibles
Les langues disponibles
Operation
8
Operation
The device operates without any handling from the user. The device detects power input and
switches automatically as soon as a change of the input supply is detected. The monitoring auto-
matically detects whether the external 230 VAC mains voltage is available and supplies it directly
to the 230 V sockets. If the external 230 VAC mains voltage is not present, the unit shifts and the
interior sockets are supplied from the inverter.
9
Cleaning and maintenance
The device is maintenance-free.
➤ Occasionally clean the product with a damp cloth.
10
Troubleshooting
The electrical power supply must be connected by a qualified electrician who has
demonstrated skill and knowledge related to the construction and operation of
electrical equipment and installations, and who is familiar with the applicable
regulations of the country in which the equipment is to be installed and/or used,
and has received safety training to identify and avoid the hazards involved.
Fault
No output voltage
shown
11
Warranty
The statutory warranty period applies. If the product is defective, please contact your retailer or the
manufacturer's branch in your country (see dometic.com/dealer).
For repair and warranty processing, please include the following documents when you send in the
product:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Note that self-repair or nonprofessional repair can have safety consequences and might void the
warranty.
10
Possible cause and solution
If a fuse is broken, open the housing top cover and replace the defective
fuse with a fuse with the same rating (10 A, T 250 V).
If the problem appears directly after installation, make sure the wiring is
done according to the wiring diagram.
MT NU 2300
EN
Publicité
Chapitres
Dépannage
