Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Accessories
Lid seal 6 L
Lid seal 8 L
Smart Timer
Opening
• Make sure that the cooking programme selector (F) is in
the
position and that the pressure indicator is down.
• Move the handle from the horizontal to the vertical
position (the jaws open): Fig 1.
• Lift the lid.
The jaws must be in
contact with the edge
of the lid.
Control panel
• The removeable control panel is designed to make it
easier to clean your NutriCook.
• Once you remove the Smart Timer
dishwasher safe.
• The following NutriCook accessories are available from
shops:
®
• To replace other parts or have repairs performed,
please call on your local T-fal Approved Service Centre.
• Only use T-fal genuine parts designed for your product
model.
• Make sure that the cooking programme Selector (F) is
in the [pictogram steam release] position and the
Opening/Closing handle (E) is in the vertical position.
• Place the lid on the NutriCook, taking care to ensure
that it is correctly positioned.
• Move the Open/Close handle from the vertical to the
horizontal position. Fig 2.
• Apply a little force at the end when closing to trigger
the locking mechanism.
• Once in the closed position, it is normal that the lid can
turn freely on the NutriCook pot.
If you cannot close the lid:
• Check that the Open/Close handle is in the vertical
position.
• Check that the seal is in place properly.
®
, the pot and lid are
T-fal accessories
Reference numbers
X1010004
X1010003
X1060003
During
Opening/Closing
operations, the control
panel must be in place
on the lid.
EN
Closing
8
Publicité
Table des Matières
