Connect It And Go - Motorola Roadster Pro Mode D'emploi

Connect it and go

set up Bluetooth®
Turn off any Bluetooth devices previously paired with your
speakerphone. Then:
1 1
2
1 3
4
6
Connect it and go
Turn on Bluetooth on your device.
Turn on the car speakerphone. After the blue light comes
on and you hear, "ready to pair," follow the voice prompts
to pair and connect with the device.
Go to the Bluetooth menu on your device,
and enter passcode 0000 if prompted.
When the device and car speakerphone
connect, you'll hear "pairing complete".
en