Publicité
Les langues disponibles
Les langues disponibles
9. DC 12V
1. Turn on main the power
2. Plug in the DC output port
3. DC output voltage: 9-12.6V
4. DC output current: 5A max per
port
10. LED Light Panel
1. Turn on main power
2. Double click the button to turn on the LED light panel on half light
mode.
3. Continue to click the button to turn to the highlight mode.
4. Continue to click the button to turn to the SOS mode.
5. Continue to click the button to turn to the strobe mode.
6. In any mode status, long press 2 seconds to switch off the light
panel.
11. Power Indicator
1. It has four LEDs to display the remaining power level status.
While charging, the LED will light up based on the current battery
level:
Charging: ( : LED flash; : LED is off; : LED is on)
100% 76% - 99%
51% - 75%26% - 50%0% - 25%
2. When you want to check the remaining power level under standby
or working status, just short press the main power button to check as
below:
100% - 75%75% - 50%
50% - 25%25% - 10%≤10%
• Low Battery: When the battery is lower than 10%, the 1st LED will
be blinking.
• AC Power LED indicator: When it is green, AC output is on. When
it is red, AC output is faulty, need to be recharged.
12. Caution
1. Do not put anything on the unit. Danger of overheating.
2. It has no waterproof protection, do not store or use in wet, raining
weather environment.
3. Keep far away from fire and children.
4. Do not disassemble the product.
5. Fully charge the generator before storing it for a long time.
6. When you stop to use the generator, long press the button.
7. Do not leave the generator in your car under high temperature. It
may cause serious safety issues.
Publicité
