ETD Electric Station TRAVELER Notice D'utilisation

PORTABLE ENERGY GENERATOR
EN - USER MANUAL
1. Get To Know Your Gear
7
14
8
1
9
2
10
3
15
11
4
16
12
5
6
13
17
Main Power LED Indicator DC 12V Cigarette Lighter Socket
Main Power Button DC 12V Outputs x3
Remaining Power Level LED Indicator AC Power Indicator
Type-C PD Output AC Power Outputs x2
Wireless Speaker AUX-IN AC Output Switch
Wireless Speaker Play Control Button
LED Light Panel
USB QC3.0 Output
USB 5V/2.4A Outputs x2
LED Light Panel Switch
DC Input Port
Wireless Speaker Working LED Indicator
Wireless Speaker
2. Specification
Capacity 462Wh (3.7V/124,800mAh)
Battery Type Lithium-ion Cell
DC Input DC 19V/5A(Max) by Adapter
MPPT Solar Input 14-25V by Solar Panel (Max 100W)
Rated Output Power: 500W
AC Output Power
Peak Output Power: 800W (2 seconds)
220-240V/50Hz
AC Output
USB Outputs: 5V/2.4A x2
QC3.0 x1(5V/3A,9V/2A)
Type-C PD x1(5V/3A,9V/3A,12V/3A,15
V/3A,20V/3A) Max 60W
DC Output
DC 9-12.6V Car Socket x 1 (10A Max)
DC 9-12.6V,Max 5A Output x3 (Total
Share 10A Max)
5W
LED Lighting
Bluetooth 3.0 10W
Wireless Speaker
Pure Sine Wave
Inverter Waveform
5.5Kg
Net Weight
290x155x190mm
Dimension
3. Charging Your Generator
Please, recharge the generator before using or storing it, at least every
3 months with the AC adapter, the car charger or a solar panel (100W).
Make sure to plug in the correct DC input port.
Exclamation-Triangle
4. Turn on/off The Generator
1. Long press 2 seconds the main power button to turn on the genera-
tor until the power LED indicator turns green.
2. Long press 2 seconds the main power button to turn off the genera-
tor until the power LED indicator turns off when you finish.
18
Exclamation-Triangle Before use, please turn on the main power and check that the main
power LED is green.
5. How to Use AC Output Port
1. Long press 2 seconds the
main power button to turn on
the generator.
2. Plug in the main socket.
3. Switch on AC Output Switch.
Please switch off AC Output Switch when you do not use to save the
energy.
4. When the power inverter is under faulty, AC Power Indicator will
be red color.
6. USB Output
1. Turn on main power.
2. Plug in your device to USB output socket.
7. Speaker
1. Turn on the main power button.
2. Long press 2 seconds the "" button to turn on the speaker.
DC input port
3. Search the speaker as «PS-Speaker» and connect it with your
mobile phone.
4. - Short click to decrease
volume
+ Short click to increase volume
Short press to play/pause
8. Car Socket
1. Turn on the main power
2. Open the cover
3. Plug in the car lighter
4. Output voltage: 9-12.6V
5. Output current: 10A (max)
AC Output Switch
PS-Speaker
- Long press to previous song
+ Long press to next song
Long press 2s to turn on/off
the speaker