aidapt VP159R Notice D'emploi page 4

Fitting the Stabilisers
Take the stabiliser (B) marked with the letter (A) and place it at the front of the unit marked
with the letter (A), as shown in Figure 2. Insert the M-4x25 screws (D).
Take the rear stabiliser (B1) marked with the letter (B) and go through the same fitting
procedure as with the front stabiliser. Refer to Figure 3.
Figure 2 Figure 3
Attaching the Pedals
Right and left refer to the position that the user adopts when exercising. Insert the right-
hand pedal (C-R), marked with the letter (R), onto the right-hand crank, also marked with an
(R).
Insert the left-hand pedal (C-L), marked with the letter (L) onto the left-hand crank, also
marked with an (L). See Figure 4.
Figure 4
Usage and Maintenance Instructions Ver.1 12/2012 (2532)
4