Assembly - Jetboil GENESIS Instructions

ASSEMBLY

• Perform leak checks outside, in a well-ventilated area.
• Operate at least 1m/3.3ft away from combustible materials and
ignition sources.
• Before each use: Keep stove area clear and free from combustible
materials, gasoline, and other flammable vapors and liquids.
• Do not obstruct the flow of combustion and ventilation air to the stove.
• Do not use windscreen other than the one provided with this product;
use of another windscreen or outback oven can overheat the fuel
canister, resulting in explosion.
• Do not use an appliance which is leaking, damaged or which does not
operate properly.
• Always change gas canisters in a well ventilated location away from
any sources of ignition, such as naked flames, pilot, electric heaters/
equipment and away from other people.
• Do not install or use Fuel Cylinder in an inverted position
(Reference Fig. 4).
1. Remove packed contents from bag (Fig. 1)
NOTE: Strainer Lid (1.2), 5L Flux Pot (1.3) and 10" Fry Pan (1.5) are
included only with the Genesis Stove System OR sold separately
as accessories.
2. Place latched stove on a flat, level surface, at least 1m/3.3ft away
from any combustible materials or ignition sources.
7
WARNING