Axis Communications T864 Serie Guide D'installation page 4

Read this first
Read through this Installation Guide carefully before
installing the product. Keep the Installation Guide for
future reference.
Legal considerations
Video and audio surveillance can be regulated by laws
that vary from country to country. Check the laws
in your local region before using this product for
surveillance purposes.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis office of
any inaccuracies or omissions. Axis Communications
AB cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty
of any kind with regard to the material contained
within this document, including, but not limited to,
the implied warranties of merchantability and fitness
for a particular purpose. Axis Communications AB
shall not be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Intellectual property rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in
this document. In particular, and without limitation,
these intellectual property rights may include one or
more of the patents listed at axis.com/patent.htm and
one or more additional patents or pending patent
applications in the US and other countries.
Equipment modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthorized
equipment changes or modifications will invalidate all
applicable regulatory certifications and approvals.
Trademark acknowledgements
AXIS COMMUNICATIONS, AXIS and VAPIX are
registered trademarks or trademark applications of
Axis AB in various jurisdictions. All other company
names and products are trademarks or registered
trademarks of their respective companies.
Regulatory information
Europe
This product complies with the applicable CE marking
directives and harmonized standards:
•
Electromagnetic Compatibility (EMC) Directive
2014/30/EU. See Electromagnetic compatibility
(EMC) on page 4 .
•
T8646: Low Voltage Directive (LVD) 2014/35/EU.
See Safety on page 4 .
•
Restrictions of Hazardous Substances (RoHS)
Directive 2011/65/EU. See Disposal and recycling
on page 5 .
A copy of the original declaration of conformity
may be obtained from Axis Communications AB. See
Contact information on page 5 .
Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
•
Radio frequency emission when installed
according to the instructions and used in its
intended environment.
•
Immunity to electrical and electromagnetic
phenomena when installed according to the
instructions and used in its intended environment.
USA
This equipment has been tested using a shielded
network cable (STP) and found to comply with the
limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case the
user will be required to correct the interference at his
own expense.The product shall be connected using a
shielded network cable (STP) that is properly grounded.
Canada
This digital apparatus complies with
CAN ICES-3 (Class A). The product shall be
connected using a shielded network cable (STP) that
is properly grounded. Cet appareil numérique est
conforme à la norme CAN NMB-3 (classe A). Le produit
doit être connecté à l'aide d'un câble réseau blindé
(STP) qui est correctement mis à la terre.
Europe
This digital equipment fulfills the requirements
for RF emission according to the Class A limit of
EN 55022 (T8642 and T8646) and EN 55032 (T8643).
The product shall be connected using a shielded
network cable (STP) that is properly grounded. Notice!
This is a Class A product. In a domestic environment
this product may cause RF interference, in which case
the user may be required to take adequate measures.
Australia/New Zealand
This digital equipment fulfills the requirements
for RF emission according to the Class A limit
of AS/NZS CISPR 22 (T8642 and T8646) and
AS/NZS CISPR 32 (T8643). The product shall be
connected using a shielded network cable (STP) that is
properly grounded. Notice! This is a Class A product.
In a domestic environment this product may cause RF
interference, in which case the user may be required
to take adequate measures.
Japan
この装置は、クラスA 情報技術装置です。この
装置を家庭環境で使⽤すると電波妨害 を引き
起こすことがあります。この場合には使⽤者
が適切な対策を講ずるよう要求され ることが
あります。 本製品は、シールドネットワーク
ケーブル(STP)を使⽤して接続してください。
また適切に接地してください。
Safety
T8646: This product complies with IEC/EN/UL 60950-1,
Safety of Information Technology Equipment.