Belkin F5D7001uk Manuel De L'utilisateur page 29

Troubleshooting
Installation CD-ROM does not start WNU.
If the CD-ROM does not start the WNU automatically, it could be
that the computer is running other applications that are interfering
with the CD drive.
If the WNU screen does not appear within 15-20 seconds, open up
your CD-ROM drive by double-clicking on the "My Computer" icon.
Next, double-click on the CD-ROM drive that the Installation CD has
been placed in to start the installation. Then, double-click on the
folder named "Files". Next, double-click on the icon named "Setup.
exe".
Power LED does not come ON; Card is not working.
If the LED indicators are not ON, the problem may be that the Card
is not connected or installed properly.
Verify that the Card is plugged firmly into the PCI slot of your
computer. Check to see that the drivers for the Card have been
installed. Right-click on the "My Computer" icon on your desktop.
Choose "Properties" and navigate to the "Device Manager" and
see if your Card is listed without any errors. If an error is indicated,
contact Belkin Technical Support.
27 27
1
2
3
4
5
6