Belkin F5D7001uk Manuel De L'utilisateur page 28

Troubleshooting
If the correct network name is listed in the "Available Networks"
list, please follow the steps below to connect wirelessly:
1.
Click on the correct network name in the "Available Networks" list.
2.
If the network has security (encryption) enabled, you will need to
enter the network key. For more information regarding security,
please see "Securing your Wi-Fi Network" on page 15 of this
manual.
3.
Within a few seconds, the tray icon in the lower right-hand
corner of your screen should turn green, indicating a successful
connection to the network.
If you are still unable to access the Internet after connecting to the
wireless network, please contact Belkin Technical Support.
The name of your wireless network DOES NOT appear in the list of
"Available Networks".
If the correct network name is not listed under "Available Networks" in
the WNU, please attempt the following troubleshooting steps:
1.
Temporarily move computer, if possible, to five to 10 feet away from
the Wireless Router. Close the WNU and reopen it. If the correct
network name now appears under "Available Networks", you may
have a range or interference problem. Please see the suggestions
listed in the "Placement of your Wireless Networking Hardware for
Optimal Performance" section on page 2.
2.
2. Using a computer that is connected to the Wireless Router
via a network cable (as opposed to wirelessly), ensure that
"Broadcast SSID" is enabled. This setting is found on the
Router's wireless "Channel and SSID" configuration page. For
detailed instructions on accessing this page and changing
settings, please see your Wireless Router's User Manual.
If you are still unable to access the Internet after completing these
steps, please contact Belkin Technical Support.
26 26