Publicité
Les langues disponibles
Les langues disponibles
OPERATION ______________________________
Useful tips
Hold the appliance with a re-
7
laxed and comfortable grip.
Always cut against the natural
7
direction of the hair.
As you cut, take a break at regu-
7
lar intervals. You can always
make a correction, but not once
the hair has been cut.
Only cut a small amount the first
7
time you use it. This is the only
way to get used to the variable
positions.
Keep combing the hair. Only
7
look for hair which is too long
and comb out clippings.
Beard trimming
1
Adjust the trimming length by refer-
ring to the "Preparation" section.
2
Press the On/Off switch
switch on the appliance.
– The appliance starts.
3
Place the cutting head
beard.
4
Move the cutting head
the direction of hair growth. Apply
only a slight pressure when cutting
with slow, gentle movements.
24 ENGLISH
5
After use, switch off the appliance
with the On/Off switch
Notes
If the appliance is blocked by
7
thick hair while you are using
it, switch it off. If running it from
the mains, unplug the socket. Re-
move the adjustable comb and
clean the cutting head with the
brush supplied. Clean the appli-
ance as described in the "Clean-
ing and Care" section.
For trimming contours, remove
7
the adjustable comb 1
G
combs (cutting length is 1.5 mm).
to
B
on the
A
against
A
. Use the appliance without the
.
B
or 2
D
Publicité
