Filter - Sonnenkonig ZERMATT Mode D'emploi

5 Filter

BATTERY CHANGE
• Turn the cover on the back of the remote control counterclockwise and remove the cover.
• Remove the old battery.
• Insert the new battery and the cover.
• Close the cover by turning it clockwise.
Open the front cover as shown in the diagram and
remove the packaging from the fi lters�
Insert the HEPA fi lter with the tab facing the front�
Insert the activated carbon fi lter with the tab facing
forward
Insert the pre-fi lter and make sure that the fi lter is
fl ush with the unit�
Replace the front cover�
63
Please remove the
battery if it will not
be used for a long
time.