Télécharger Imprimer la page

ubbink SolarMax 600 Mode D'emploi page 3

Masquer les pouces Voir aussi pour SolarMax 600:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
1 Operating manual SolarMax 600
Care and maintenance
Solar module
Deposits of dust, dirt and foliage can collect on the solar module. These can be removed using a microfibre cloth and glass cleaner.
Solar pump
If the pump output performance reduces or no longer functions after a certain peirod of time, then please clean the pump as follows.
1) Disconnect the pump cable from the solar module
2) Pull the filter housing from the pump
3) Press on the base plate and push this away from the pump
4) Open the rotor cover by turning it in an anti-clockwise direction
5) Pull the rotor out of the rotor shaft
6) Clean and wash the individual parts
7) Assemble the pump in reverse order
Caution! Be careful with the ceramic shaft during cleaning, as this can be easily broken.
Protect fountain pump against frost!
The pump should be taken out of operation during the cold winter months. Clean the pump using lukewarm water and store the entire system in a frost-free location.
FAULT RECTIFICATION
Problem
Pump does not run
Pump runs but no water comes out
2
Guarantee
We give a 2-year guarantee from the date of purchase on materials and manufacturing defects for this product. To make a claim under this guarantee, the original invoice must be
submitted as proof of purchase. Claims brought about by incorrect installation or operation, inadequate maintenance, the effects of frost, inexpert attempts at repair, the use of force,
wrongful acts by a third-party, overloading and foreign objects, as well as all damage to parts resulting from wear and tear, are not covered by this guarantee. By virtue of the Product
Liability Act, we are not liable for damage caused by our equipment, if this is the result of inexpert repairs.
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
Manual Solarmax 600.indd 3
Possible cause
No connection with the solar module
Impeller blocked
Pump outlet or fountain jet blocked
Solution
Check the electrical connection between the pump and
solar module
Clean pump as described under "Cleaning and
maintenance"
Clean the pump outlet, riser tubes and fountain jet
02-12-15 14:57

Publicité

loading