tiko Energy Solutions Sense-3 Mode D'emploi page 5

Temperature Sensor User's Manual
Device Operation
IMAGE 5 shows the LCD display. On the top (A) is displayed the temperature, on the
bottom (B) the relative air humidity. On the bottom at (C), the signal strength is indicated.
When the remaining capacity of the battery reaches 10%, the battery icon (D) will appear.
Sense-3 autonomously performs and transmits each 5 minutes a new measure. Before
transmitting, the device performs a CCA (Clear Channel Assessment) and expects an an-
swer from his counterpart (M-Box), in order to ensure that the information has been
properly delivered. The LED above the display blinks green for each successful transmis-
sion and red for each failed one.
If the device is not able to communicate with the M-Box for 30 minutes, then the tem-
perature and humidity information will be removed from the LCD. It is possible to show
the information again and to trigger another transmission by pressing any of the two but-
tons.
Step 1 If the device remains property of tiko Energy Solutions AG or
its authorized reseller, it must be returned. Otherwise, the
ultimate disposal of a device shall be handled according to
national laws and regulations.
tiko Energy Solutions AG
English
Operation
Uninstalling
IM-0007-0005 Rev. 10
5 / 32