AVM FRITZ!DECT 200 Mode D'emploi page 4

Security
Do not subject FRITZ!DECT 200 to a load higher than its limit of 2300 W/10 A (ohmic
load). Overloading can damage FRITZ!DECT 200, or cause malfunctions or an
electrical accident.
Only use FRITZ!DECT 200 indoors.
•
Operate FRITZ!DECT 200 only in a dry location that is free of dust, protected from direct
•
sunlight, and well ventilated.
Insert FRITZ!DECT 200 into an electrical outlet that is easy to reach.
•
Do not insert FRITZ!DECT 200 into another FRITZ!DECT 200.
•
Do not operate any devices that present a risk of fire (for instance, electric irons, radiant
•
heaters) on FRITZ!DECT 200.
Never let liquids get inside FRITZ!DECT 200.
•
Do not modify FRITZ!DECT 200. FRITZ!DECT 200 may not be opened, converted, modified
•
or repaired except by a qualified technician.
Configure automatic switching for FRITZ!DECT 200 only if the connected devices are
•
designed for such operation. Frequent switching can shorten the service life of electrical
devices. No liability will be accepted for attendant damage to corresponding devices.
4