Impex XL Perform Tools 552077 Notice D'instruction page 18

EN - FEATURE :
• Hydraulic motorcycle lift is operated by one foot pedal to lift and by another foot pedal to release
• After lifting, a spindle can be used to control lifting height to prevent unintentional slow
lowering.
• With leading plate, the motorcycle can be easily moved onto the platform.
• A locking front wheel vise prevents the motorcycle from slipping, tilting over or falling.
• The motorcycle lift can be anchored to floor with two adjusting screw to prevent it from sliding.
• The hydraulic motorcycle lift can be moved easily with four wheels.
WARNING :
FOR YOUR SAFETY AND TO PREVENT INJURY : READ ALL INSTRUCTIONS BEFORE USING
THIS TOOL !
m
CAUTIONS :
1 - The access ramp to the lift platform must ALWAYS be resting on the floor while the motorbike is
being put on it. The lift platform must only be raised or lowered once the motorbike has been put on
the HORIZONTAL section of the platform fitted for the purpose.
Both wheels of the motorbike must be resting on the horizontal section of the platform.
NEVER RAISE THE PLATFORM IF THE MOTORBIKE IS ON THE ACCESS RAMP
2 - To make sure the platform is fully stable, put it on a hard, level surface
3 - Never use the tool to lift people or animals.
4 - Keep children away. Children must never be allowed in the work area. Do not let them handle
machines, tools or extension cords.
5 - Keep work area clean. Cluttered areas invite injuries.
6 - Before operating, be sure to fix the motorcycle lift on floor with adjusting screws to prevent the
lift from sliding during operation.
7 - Never touch the scissor arms, both when it is lifting or moving.
8 - After putting the motorcycle on the platform, be sure to lock the front wheel of the motorcycle
using vise to prevent it from slipping, tilting over, or falling.
9 - After lifting, be sure to insert set spindle into front lifting arm to prevent from unintentional slow
lowering.
10 - Observe work area conditions. Do not work in damp or wet locations. Don't expose to rain.
11 - Keep work area well lighted.
12 - Do not overload the lift capacity (max 365 KG). Overloading can cause damage to or failure of
the motorcycle lift and may result in personal injury.
13 - Store idle equipment. When not use, tools must be stored in a dry location to inhibit rust. Always
lock the tool in lower position and keep it out from reach of children.
14 - Check for oil leakage, if any bring to a professional for fixing
15 - MAINTENANCE. If necessary, use only an oil of the type HJ13
16 - This product should not be used under difficult conditions (for example in extreme climates,
frozen conditions, strong magnetic fields). This product's service life is five years
18