Publicité
Les langues disponibles
Les langues disponibles
EN
EN
Safety Instructions
Safety Instructions
x
Read and follow all instructions carefully. Keep these instructions for future reference.
x
Always turn off and unplug the machine before moving, cleaning or anything other than normal operation. Otherwise serious injury may
x
Read and follow all instructions carefully. Keep these instructions for future reference.
result. Clean shredder with a damp cloth, using a mild soap and water solution.
x
Always turn off and unplug the machine before moving, cleaning or anything other than normal operation. Otherwise serious injury may
x
Do not use abrasives or solvent-based cleaners.
result. Clean shredder with a damp cloth, using a mild soap and water solution.
x
Turn the power switch off before removing the waste bin. It is advisable to disconnect the power cord before opening the shredder.
x
Do not use abrasives or solvent-based cleaners.
x
This product should never be placed near a radiator or other heat source.
x
Turn the power switch off before removing the waste bin. It is advisable to disconnect the power cord before opening the shredder.
x
Do not allow anything to rest on the power cord. Do not place the power cord where people may walk on it.
x
This product should never be placed near a radiator or other heat source.
x
Do not attempt to service this product yourself, as opening or removing covers may expose you to the risk of injury. Also, doing this will
x
Do not allow anything to rest on the power cord. Do not place the power cord where people may walk on it.
void the shredder's warranty.
x
Do not attempt to service this product yourself, as opening or removing covers may expose you to the risk of injury. Also, doing this will
x
Unplug this product and contact technical support if:
void the shredder's warranty.
o
x
Unplug this product and contact technical support if:
o
o
The power cord or plug is damaged or frayed.
o
o
Liquid has been spilled on the product.
o
o
The product has been exposed to rain.
o
o
The product does not operate normally, even when the operating instructions are followed.
x
This shredder should be operated only with an operator in attendance.
o
The product has been dropped, or the casing has been damaged.
x
This shredder should be operated only with an operator in attendance.
Installation / Setup
Installation / Setup
x
Mount the shredder correctly on the basket.
x
The switch located on top of the housing has 4 positions.
x
Mount the shredder correctly on the basket.
x
Make sure the switch is set to the "OFF" position.
x
The switch located on top of the housing has 4 positions.
x
Connect the power cord to any standard 230 volt AC outlet.
x
Make sure the switch is set to the "OFF" position.
x
It is normal for residual lubricant in the motor to burn off during the first several extended uses of your shredder. Should you notice a
x
Connect the power cord to any standard 230 volt AC outlet.
slight burning odor or the presence of small wisps of smoke during the first several extended uses, you may continue using the shredder.
x
It is normal for residual lubricant in the motor to burn off during the first several extended uses of your shredder. Should you notice a
If either symptom continues to occur after repeated use, please contact technical support for assistance.
slight burning odor or the presence of small wisps of smoke during the first several extended uses, you may continue using the shredder.
If either symptom continues to occur after repeated use, please contact technical support for assistance.
Normal Operation
Normal Operation
x
Move the switch to the "AUTO" position, the green LED "POWER" will light up.
x
Insert paper to activate. The shredder starts automatically and will stop as soon as all the paper has gone through.
x
Move the switch to the "AUTO" position, the green LED "POWER" will light up.
x
The shredding capacity is 8 sheets (80g/m2) or 1 credit card. However, you should shred only one type of these items at a time to avoid
x
Insert paper to activate. The shredder starts automatically and will stop as soon as all the paper has gone through.
causing an overload.
x
The shredding capacity is 8 sheets (80g/m2) or 1 credit card. However, you should shred only one type of these items at a time to avoid
x
Never attempt to shred sealed envelopes. Doing so may damage the shredder. Always remove and unfold envelope contents completely
causing an overload.
before attempting to shred. NEVER shred envelopes, labels or anything with glue or any sticky substance as this will lead to paper jams.
x
Never attempt to shred sealed envelopes. Doing so may damage the shredder. Always remove and unfold envelope contents completely
x
Do not shred any wet paper, carbon paper, or vinyl bags. The waste will stick in the cutter and may lower the shredding performance.
before attempting to shred. NEVER shred envelopes, labels or anything with glue or any sticky substance as this will lead to paper jams.
x
Although the shredder can safely shred the occasional standard staples, you should remove them if possible. Also, industrial or
x
Do not shred any wet paper, carbon paper, or vinyl bags. The waste will stick in the cutter and may lower the shredding performance.
non-standard, large size staples must be removed. Paperclips should not be shredded at any time, as they significantly reduce the life of
x
Although the shredder can safely shred the occasional standard staples, you should remove them if possible. Also, industrial or
the shredder. Please remove staples and paperclips from paper before shredding.
non-standard, large size staples must be removed. Paperclips should not be shredded at any time, as they significantly reduce the life of
the shredder. Please remove staples and paperclips from paper before shredding.
Paper Jam
Paper Jam
x
If too much paper has been inserted, a jam may result.
x
To clear the jam, empty the waste basket first and mount the shredder on the basket again
x
If too much paper has been inserted, a jam may result.
x
Move the switch to the "REV" (rewind) position to clear the shredder of paper that has not passed through properly.
x
To clear the jam, empty the waste basket first and mount the shredder on the basket again
x
If not all the paper can be cleared, set the switch to the "FWD" (forward) position to help the remaining paper to pass through.
x
Move the switch to the "REV" (rewind) position to clear the shredder of paper that has not passed through properly.
x
This procedure may be repeated several times until the jam is cleared.
x
If not all the paper can be cleared, set the switch to the "FWD" (forward) position to help the remaining paper to pass through.
x
This procedure may be repeated several times until the jam is cleared.
Basket full
Basket full
x
The shredder is equipped with a bin full sensor and a compacting function. When the basket becomes full, the shredder will cease its
operation and the orange LED "BINFULL" will light up.
x
The shredder is equipped with a bin full sensor and a compacting function. When the basket becomes full, the shredder will cease its
x
Press down the handle of the shredder several times to compact the waste. The "BINFULL" LED will go out and the shredder will start
operation and the orange LED "BINFULL" will light up.
normal operation.
x
Press down the handle of the shredder several times to compact the waste. The "BINFULL" LED will go out and the shredder will start
x
This procedure may be repeated several times before it becomes necessary to empty the basket.
normal operation.
x
This procedure may be repeated several times before it becomes necessary to empty the basket.
Overheat
Overheat
x
The shredder is built for short periods of use only. Continuous shredding should not last more than 2 minutes, after which the shredder
should be allowed to cool down for 30 minutes before continuing.
x
The shredder is built for short periods of use only. Continuous shredding should not last more than 2 minutes, after which the shredder
x
If the shredder is used continuously for more than 2 minutes it will stop operating and the red LED "OVERHEAT" will light up. In this case,
should be allowed to cool down for 30 minutes before continuing.
set the switch to the "OFF" position. The shredder will not resume its normal operation until the motor has cooled down to a safe
x
If the shredder is used continuously for more than 2 minutes it will stop operating and the red LED "OVERHEAT" will light up. In this case,
temperature. This may take 30 minutes or more.
set the switch to the "OFF" position. The shredder will not resume its normal operation until the motor has cooled down to a safe
temperature. This may take 30 minutes or more.
The power cord or plug is damaged or frayed.
Liquid has been spilled on the product.
The product has been exposed to rain.
The product does not operate normally, even when the operating instructions are followed.
The product has been dropped, or the casing has been damaged.
Publicité
