Bell Star Serie Mode D'emploi page 25

3. Lift and rotate to completely remove the Neck Curtain at the
3
front of the helmet
Installation:
To install, reverse steps 1-3
Chinstrap Cover
Removal:
After removing the Neck Curtain, Cheek Pads and Main Pad;
unsnap chin strap covers and gently slide off the chin strap.
Installation:
To install, slide the correct Chin Strap Cover as shown
(warning label cover goes on strap opposite D-ring strap)
and snap securely.
Please note: Chin Strap Covers should be installed before
installing Cheek Pads, Main Pad and Neck Curtain.
26