Publicité
Les langues disponibles
Les langues disponibles
Manual Start
This controller has the ability to allow for manual watering without
disturbing the preset programs. To use this feature press the MA-
ALL
NUAL button and the words ALL will blink on the display.
By pressing the ENTER button all areas
will begin to water in succession for 3
minutes.
Please note that it is not possible to
modify the parameter of 3 minutes in this
function.
manual
zone
Pressing the MANUAL button the words
ALL will blink on the display, pressing the
+ button you can set the desired wate-
ring duration of zone 1 and press ENTER
to confi rm and repeat to set the duration
of manual watering for the other zones.
Please note that the controller will ask for
the desired duration of manual watering for
all zones before the function will start. If you
do not wish for some zones to be watered
in manual mode then when prompted for
duration, leave as 0.
Set times in this function are not stored.
30
via Kennedy 38/40
20023 Cerro Maggiore
ZONE
ALL
AUTO
OFF
SET
%
ZONE
ALL
AUTO
OFF
SET
%
RAIN s.p.a.
ITALY (MI)
Publicité
