Product Safety Warnings - Yard force Classic 500 Consignes De Sécurité

Masquer les pouces Voir aussi pour Classic 500:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
GB
• Connect the machine to a power socket with a residual-
current circuit breaker that has a rated current of no more
than 30 mA.
• Always keep the extension cable well away from the
cutting tools. Should the power cable become damaged
during work, instantly disconnect the power cable
from the mains. DO NOT TOUCH THE POWER CABLE
BEFORE IT HAS BEEN DISCONNECTED FROM THE
MAINS! Risk of electric shock.
• The supply cord cannot be replaced. If the cord is
damaged the appliance should be scrapped.
• Keep extension cable away from blades and other
moving parts. They may damage the cable and result in
contact with live parts.
• Check that the mains voltage is the same as indicated on
the rating plate.
MAINTENANCE AND STORAGE
• Keep all nuts, bolts and screws tight to be sure the
machine is in a safe working condition.
• Replace worn or damaged parts for safety.
• Ensure that only the recommended replacement cutting
blades are fitted.
• Ensure that batteries are charged using the charger
supplied or recommended by the manufacturer. Incorrect
use may result in electric shock, overheating or leakage
of corrosive liquid from the battery.
• Servicing of the machine should be carried out according
to manufacturer's instructions.
• In the event of leakage of electrolyte, flush with water/
neutralising agent, seek medical help if it comes into
contact with the eyes.
10
• Store the appliance with battery pack fully charged at
room temperature (around 20 °C).
• Every deep discharge cycle decreases the capacity of
battery pack. To prolong battery life, it is recommended
to charge the battery every 6 months over extended
periods of time without use.
TRANSPORT
The original packaging should be used when transporting
the Robotic Mower over long distances.
To safely move from or within the working areas:
• Press the STOP button to stop the mower.
• Move the main switch button to the OFF position if you
intended to carry the mower.
• Carry the Robotic Mower using the handle below at the
rear. Carry the mower with the blade disc away from the
body.

PRODUCT SAFETY WARNINGS

Not to touch moving hazardous parts before these have
come to a complete stop.
Do not store anything heavy on the top of the Robotic
Mower or docking station both during storage or when in
use.
Never use the device if the main power switch is damaged
or does not work properly. Never modify the main power
switch. Set the main power switch to OFF for storage or
when the device is not in use. Use the original packaging
when transporting the Robotic Mower, especially for long
distances.
11
GB

Publicité

Table des Matières
loading

Table des Matières