Table des Matières
Publicité
Filter Configurations and Maintenance Tips
INSTALLATION
1. Remove vacuum head from tank.
2. Place Targa filter in tank.
3. Replace vacuum head on tank with the
airflow indicator light centered over tank
inlet. Align clamps on the side of tank with
tabs on head and lock clamps.
INSTALLATION
1. Remove vacuum head from tank.
2. Unfold dust bag, gently seperate walls
of bag, insert into tank (before placing
Targa filter in place).
3. Slide rubberized bag collar over inlet nozzle.
Ensure collar face is against tank wall.
Optimum "Clean Air" Filtration (Targa Filter + Paper Dust Bag + HEPA filter)
INSTALLATION
1. Remove vacuum head from tank, setting
the head on the side.
2. Place clamp on outer ring of HEPA (do not
tighten until filter is on black float cage).
WARNING! REMOVE ALL OTHER FILTERS BEFORE INSTALLING WET FILTER
INSTALLATION
1. Remove vacuum head from tank.
2. Remove any other filters.
3. Empty out contents in vacuum tank (rinse
out with water if possible).
4. Place wet filter in tank ensuring black gasket
is free of dirt and sitting flat on tank rim.
5. Replace head and lock clamps.
CONFIGUARTION:
"Clean Air " Filtration (Grey Targa Filter)
General dry vacuuming.
(i.e. schools, hotels, offices, etc.)
CONFIGUARTION:
Superior "Clean Air" Filtration (Grey Targa Filter + Paper Dust Bag)
General dry vacuuming with the convenience
of a bag. (i.e. schools, hotels, offices, etc.)
Excellent for fine dust applications where
blinding of filter is a problem. (i.e. chalk dust,
dry wall dust, lampback, silica dust, etc.)
CONFIGUARTION:
Ultra high filtration vacuuming where air
quality is crucial. (i.e. hospitals, computer
areas, areas where asthmatics and allergy
sufferers live and work.)
CONFIGUARTION:
Wet Filtration (Targa 990 and Targa XL)
For removal of liquids from carpets and hard
floors. Ideal when picking up liquids after
stripping and rinsing floors and for removal
of slush from entrance walk-off mats in winter.
APPLICATIONS
APPLICATIONS
APPLICATIONS
APPLICATIONS
Parts & Operations Manual
TIPS
• To maximize filter life, maintain air quality
and performance, clean filter with soft
brush, shake, or wash in lukewarm water.
• Inspect filter for signs of wear and replace
if necessary.
• For best performance, use with a paper dust
bag installed.
TIPS
• Ensure collar is on inlet as far as possible
(if not, bag may come off ).
• Sides of bag should be seperated after
installed in tank to maximize entire bag
volume.
• Grey Targa filter must be in place before
operation.
TIPS
• To maximize filter life, maintain air quality
and peak performance, the HEPA filter
should only be cleaned with a soft brush
or blown clean with compressed air.
• Never wash or expose HEPA filter to water
as this will damage filter material.
• Inspect filter for signs of wear and replace
if necessary.
• Always use with paper dust bag and
Targa filter.
TIPS
• After vacuuming liquids, clean by
vacuuming a small amount of clean water.
Allow to dry in a ventilated area.
• To minimize foam build-up, use Dustbane's
De-Foam in tank.
• For ease of emptying, fill tank to no more
than 3/4 full.
• Do not use for dry application as this will
result in damage to the motor.
Targa Eco Series
7
Publicité
Table des Matières
