Installation Position; Electrical Connection - Resol VA23 Mode D'emploi

1.2 Installation position

The valve can be mounted in any position (see figure), but the actuator must not
face downwards. In order to have enough space to carry out maintenance work, a
distance of at least 100 mm should be kept between the valve and walls or other
devices.
16

1.3 Electrical connection

Î Carry out the electrical wiring as shown in the figure.
Note
During routing of the cable, the connection cable must not touch hot
system components (e.g. radiator, pipes, etc.)
black
blue
brown
L N