Publicité
Les langues disponibles
Les langues disponibles
ii
Change of System Specification
Any change of system specification has its effects on monitoring process with stationary systems and on the measu-
ring sequence with portable measuring systems.
Intended Use
If sensors and cables are used in a way not described in the relevant user manuals, function and protection may be
impaired and serious personal damage, death or serious, irreversible injuries may result.
•
Exclusively use sensor as specified in data sheet. Any use other than specified is considered inappropriate.
Brüel & Kjær Vibro does not assume any liability for damages resulting from inappropriate use. The user is
solely responsible.
•
Mounted sensors must not be used as steps.
•
Ensure that system is exposed only to admissible environmental influences specified in technical
system data sheet.
•
Maintain electrical equipment in regular intervals. Remedy defects, e.g. loose wires, defective
connectors, immediately.
Hot surfaces
•
In line with the user manuals, sensors and cables can be operated in extensive ambient temperature ranges,
whereby they can become hot through self-heating on housing walls and can produce burning.
•
When mounted at external heat or cold sources (e.g. machine parts), systems, sensors and cables can adopt
dangerous temperatures, whereby burning, among other things, can occur in the event of contact.
Recommendations to User
If the use of the system in conjunction with machines or plant sections can produce risks outside of Brüel & Kjær
Vibro's responsibility, the user is expected to prepare and distribute safety technical instructions or warnings and to
ensure that the personnel concerned has received and understood it.
If system is integrated into a machine or designed to be assembled, commissioning must not take
place until the machine the system is to be integrated in conforms to the EC directives.
Prohibition of Unauthorized Modifications
System and accessories must not be changed neither in construction nor safety technology without the express con-
sent of Brüel & Kjær Vibro. Any unauthorized modification excludes Brüel & Kjær Vibro's liability for resulting dama-
ges.
l
page 2
Technical specifications subject to change!
©Brüel & Kjaer Vibro GmbH / 2688 DEF / 28.8.18
C105120.001 / V03
Publicité
