Black & Decker HX230 Mode D'emploi page 5

Use
Your appliance is fitted with a thermostat for your safety.
Using the appliance continuously for very long periods may
cause the appliance to overheat and stop working. It is
therefore recommended that you disconnect the appliance
from the mains supply and allow to fully cool before
continuing use.
• Place the appliance on a flat, stable surface.
• Connect it to the electricity supply.
• Select the operating mode.
• Set the thermostat to the required setting.
Mode setting
The fan heater incorporates a rotate on switch you can
select the dierent air by turning the switch clockwise to:
0 Off
Fan only
I Warm air
II Hot air
Thermostat
When heating mode is selected
• Turn the thermostat knob in a clockwise direction to the
max position.
• Once the room has reached the desired temperature,
turn the thermostat knob slowly in an anti-clockwise
direction until a "click" sound is heard. That is the setting
temperature. Now, the thermostat is switched off.
• The thermostat will automatically maintain the set
temperature. It will switch on when the room
temperature is below and switch off if above the setting.
• The indicator lamp shows that heating mode is switched
on.
Cleaning and maintenance & storage
Warning! Before cleaning and maintenance, switch the
appliance off and remove the plug from the socket.
Warning! Do not immerse the appliance or the cord set or
the plug in water or any other liquid.
• The appliance is easier to clean if you do so immediately
after use.
• Do not use abrasive cleaning agents, scourers, acetone,
alcohol etc. to clean the appliance.
• Clean the motor unit with a damp cloth. Never immerse
the motor unit in water nor rinse it under the tap.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal of the new
plug.
(Original instructions)
• Connect the blue lead to the neutral terminal.
• If the product is class l (earthed), connect the green /
yellow lead to the earth terminal.
Warning! If your product is class ll double insulated (only 2
wires in the cord set), no connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Any replacement fuse must be of the same rating as the
original fuse supplied with the product.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black+Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with other household waste. Make this product
available for separate collection.
• Black+Decker provides a facility for recycling
Black+Decker products once they have reached the end
of their working life. This service is provided free of
charge. To take advantage of this service please return
your product to any authorised repair agent who will
collect them on our behalf.
• You can check the location of your nearest authorised
repair agent by contacting your local Black+Decker
office at the address indicated in this manual.
Alternatively, a list of authorized Black+Decker repair
agents and full details of our after-sales service and
contact are available on the Internet at:
www.2helpU.com.
Technical data
Voltage
Product dimensions
Net Weight
Warranty
Black+Decker is confident of the quality of its products and
offers an outstanding warranty.
This warranty statement is in addition to and in no way
prejudices your statutory rights.
The warranty is valid within the territories of the Member
States of the European Union and the European Free Trade
Area.
If a Black+Decker product becomes defective due to faulty
materials, workmanship or lack of conformity, within 24
months from the date of purchase, Black+Decker warranty to
replace defective parts, repair products subjected to fair wear
and tear or replace such products to ensure minimum
inconvenience to the customer unless:
ENGLISH
HX230
V 230 - 240
AC
Cm 24.4 x 30.5 x 12
Kg Approx.1.4
5