Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFETY PRECAUTIONS
! Before operating any router read and
understand all safety instructions in
the owner's manual that came with
the router.
! If you do not have a manual, contact
the manufacturer and obtain one
before using any power tool.
! Always wear eye protection in
compliance with ANSI safety
standards when operating any power
tool.
! Always use proper guards and
safety devices when operating power
tools and machinery.
! Carefully check router bits before
each use. Do not use if damage or
defect is suspected.
! Do not exceed the recommended
RPM for any router bit.
! Do not wear loose clothing or jewelry
that may catch on tools or
equipment. ! Unplug the tool or
machine when mounting or making
any adjustments to mechanical
performance.
ROUTER SAFETY PRECAUTIONS
! Never force the bit or overload the
router beyond the expectations of the
tool.
! Be sure that at least 3/4 of the
shank length is inserted securely in
the router collet.
! Never bottom out the bit in the
collet. Allow 1/8" clearance between
shank and bottom of collet.
! Always make sure the fence on your
router table is locked into position
before each use.
! Always rout in two or more passes
when large amounts of stock must be
removed.
! Use reduced RPM speeds for large
diameter bits.
PRODUCT ASSEMBLY
The Mast-R-Lift Excel II product
comes in two boxes. Box #1 is the
phenolic table top and Box #2 is the
components for the Excel that you
will need to assemble
Step 1: Prior to beginning assembly of the
Mast-R-Lift Excel II, empty entire contents of
both cartons and lay out the components of Box
#2 as shown in Figure #2
Step 2: Lay your Excel II Table Top with the top
surface down on a table or bench surface with a
couple of 2 x 4's, to prop the Excel II top from the
surface of your table. The Excel II top needs to be
raised from your bench or table surface enough for
you to reach your hand in between to feed the
screws into the carriage/gear box assembly.
(See Figure #1)
Figure 1
Box #2 Breakdown
8
7
6
Figure 2
2
3
5
4
1
Publicité
