Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
LED luminaire housings can become very hot after continuous operation. To avoid burns to fingers and hands make
sure the LED luminaire has adequate time to cool before performing maintenance.
PRODUCT SPECIFICATIONS
The Ephesus Extreme High Bay luminaire is designed for harsh environments, including extreme temperatures, corrosive
and humid environments. It's also ideal for high mounting heights – even those in excess of 100 feet. Over temperature
protection, allows the wattage to decrease in response to increasing ambient temperatures to ensure reliability and
continued operation in hot environments. Optional advanced controls allow for individual or group diming in addition to
instant on and off.
The Extreme High Bay is designed to meet or exceed the following standards:
IP66
●
●
NEMA 4X
●
●
UL 1598 wet locations
●
●
ANSI C136.31-2010 3G Bridge overpass vibration (with surface mount option)
●
●
REQUIRED MATERIALS & TOOLS
STORAGE
Store luminaires in a clean, dry place, protected from dirt, water, and sunlight. See Table 1 for required storage and operating
conditions:
Storage Temperature
-40°C to +75°C (-40°F to 167°F)
Table 1. Storage and Operating Conditions
SUPPLY POWER SPECIFICATIONS
Ephesus LED luminaires are not traditional incandescent lights, they are high-tech, new generation solid-state devices. To
protect your valuable investment, the electrical power shall be clean and have stable voltage and current and undistorted
waveforms.
2
COOPER LIGHTING SOLUTIONS
WARNING
Table 3: Required Materials provided by the installer
EP-2000 or equal waveform correction device (power dependent)
Mounting Hardware (3/4" NPT mount)
Electrical splicing connectors
Cable ties or wire management
Control wires (wired control only)
Wrenches sized to fit mounting hardware
3/16" Hex Allen wrench
7/16" Socket Wrench
Torque wrench rated to a minimum of 35 ft-lbs
Operating Temperature
High Ambient: -40°C to +65°C (-40°F to 149°F)
High Output: -40°C to +50°C (-40°F to 122°F)
IB507004EN
Installation instructions
Power cable
Humidity
5% to 95% non-condensing
Publicité
Table des Matières
