Routing With The Dante Tm; Control And Monitoring Software - FRENETIK Resist 5 Manuel D'utilisation

4. Routing with the Dante™ Controller
In order to configure the audio streams you need to :
1) In the main window, in the «Routing» tab, open the channels of the transmitter device on
the right «Dante™ Transmitters» and the channels of the receiver device under «Dante™
Receivers» by clicking on the + buttons.
2) Click on the intersection point between the transmitter channel and the receiver
channel.
3) Wait until the field displays a green circle with a white check mark. For other
connections, repeat these three points. A User Guide in English for the Dante Controller
can be downloaded from the Audinate website:
https://www.audinate.com/resources/technical-documentation

5. Control and monitoring software

Fenetik Dante™ PoE+ loudspeakers can be controlled and monitored with a proprietary
software available from Frenetik's website.
The Frenetik Adjust software solutions allow for level adjustment and monitoring of each
loudspeaker ; and quick set-up of tonality levels.
A list of factory presets is available for download with the Adjust software solutions, and
save and load options are available for custom applications.
Please visit Frenetik's website and dedicated support area to download the latest Adjust
software. Please check the Setup Guide of each version of the Adjust software for product
compatibilty, embedded features and operating system compatibility.
https://en.frenetik.fr/logiciels-telechargement
User's manual - Resist 5 V2.1 03/2022 9/12