Display Mode - Vogel KFA Instructions De Service

6. Display mode

Lighting of the LED indicators signifies that the
unit is in the display mode. No flashing ! Using
this mode, the user can have current settings and
operating parameters displayed.
Start the display mode always by briefly
pressing one of the two keys
Step
1
Press briefly
2
.
3
4
5
6
7
Key
Page 27
Next Chapter
Operating Instructions KFA, KFAS
Display
Current operating state is indicated
Example: Timer is in Pause mode
Indicates remaining pause time of current
lubricating cycle
Example: 3.8 h
Indicates preset total pause time
Example: 1 h (factory setting)
Indicates preselected pump running time
Example: Timer operation
Example: System is in Pause mode,
indication of current tCO is not possible
Indicates preset value
Example: 4 min (factory setting)
Indicates system monitoring menu
6