Assembly And Setup; Adjusting The Stand - Hitachi StarBoard T-19WX Mode D'emploi

T-19WX
StarBoard

1.4 Assembly and Setup

Keep the following points in mind when installing the StarBoard.
Select a stable, flat location.
Avoid installing in locations that are dusty, extremely hot, cold, or humid. Also avoid
installing in locations exposed to direct sunlight.

1.4.1 Adjusting the Stand

Hold the body firmly and slide the stand slowly when adjusting it.
When adjusting the stand, if you pull up the lever without holding onto the body, the
body may move suddenly, resulting in unexpected injuries or damage to the body.
Follow the procedure shown below to adjust the stand.
(1) Pull up the stand lever.
CAUTION
1-7
Introduction
Stand
Lever
English