Assembly Instructions - Atleisure seasons SENTRY UMB-734955T Manuel D'assemblage, D'entretien Et D'utilisation

Assembly Instructions

CAUTION: Do not use sharp tools or equipment such as a knife or scissors
when removing the protective material, as it may damage the product. Be
careful not to throw away small parts such as bolts, washers, ect. that may
be wrapped in the protective materials.
Step 1: Place lower cross leg (C) on the ground, line up notches and place upper cross
leg (D) over the lower cross leg (C).
Step 2: Attach the holder pole (F) to the base by using the bolts (GG) and washers (HH)
(found in blister pack). Hand tighten only. Adjust the holder pole (F) to be sure it is
positioned correctly on the base. Finally tighten all bolts. Be careful not to over tighten.
C
GG
HH
4
D
Fig. 1
F
D
C
Fig. 2
E