Publicité
Les langues disponibles
Les langues disponibles
Owner's manual
1. Make sure the battery is fully charged before first use.
2. Plug the charging unit into a power supply socket and put the toothbrush handle onto
the charging unit, the charging indicator will lit up.
3. A full charge takes about 24 hours and enables approximately up to 6 weeks brushing.
Once fully charged, the charging indicator turns off automatically.
4. Pull charger unit plug out of power supply socket to save energy, or leave it in and keep
the brush on the charging unit (there is no risk of overcharging of battery).
1. Once the battery is fully charged, attach a brush head to the handle and apply
toothbrush. Note: there will be about 0,5 mm space between the brush head and the
handle.
2. To avoid splashing, guide the brush-head to your teeth before switching the appliance
on.
3. Place the bristles against the teeth at a slight angle towards the gum line.
4. Press the power button to turn it on. If you keep pressing the power button, the device
will enter next mode (the sequence is: power on in normal mode, soft mode, massage
mode, power off ).
Please note: this toothbrush has a memory function; it powers on in the last selected source.
However, when powered on for the first time, by default it boots in normal mode. Later on,
the device boots in mode it has been used lately
1. This device has been equipped with 2 minutes auto switch off function. This features
helps the user to maintain proper oral health care habits. Once the 2 minutes are up,
the toothbrush turns off automatically.
2. The toothbrush stops shortly every 30 seconds to remind user the passing time.
Tip: Use this feature to measure equal time for each tooth quadrant. This way you'll spend 30
seconds on each part.
CHARGING
OPERATION
TIMER
13
EN
Publicité
